"OMNIUM" wall base tiles, decorative tiles and floor tiles.
Size: 20x60 cm, thickness: 9.5 mm, water absorption: E > 10%, tile strength (N) min. 800, crack module (N/mm²) min. 15, stain resistance – class 4, classification – BIII, ANEXO L, tile finish: normal/matt, tile texture: no texture.
Tile colour range offered:
Size: 20x60 cm, thickness: 9.5 mm, water absorption: E > 10%, tile strength (N) min. 800, crack module (N/mm²) min. 15, stain resistance – class 4, classification – BIII, ANEXO L, tile finish: normal/matt, tile texture: texture.
Tile colour range offered:
Size: 43 x 43 cm, thickness: 9.2 mm, water absorption: 3.0% < E < 6.0%, tile strength (N) min. 1400 , crack module (N/mm²) min. 30, stain resistance – class 4, classification – BIII, ANEXO L, tile finish: normal/matt, slip resistant, tile texture: no texture.
Tile colour range offered:
VINTAGE" collection's high quality floor tiles and decorative floor tiles.
"Click" installation method; class of use 32; thickness – 8 mm; surface texture – smooth touch; profile – UNI fit; PEFC certification; special features – antistatic charactaristics;
The apartments will be equipped with "Basic 55" switches with a frame and sockets manufactured by ABB.
Painted (according to NCS) MDF skirting board (moisture resistant), standard profile, size 16 x 80 mm, m.
Apartments will be fitted with fireproof metal exterior doors (EI30) with a powder coating to protect them from rust. The thickness of the door leaf – 52 mm, the thickness of the metal sheet – 1.5 mm, the door groove – 5 mm, the rock wool filling, the rubber seal on the entire length of the perimeter. Doorframe – 110 mm. Door dimensions – 2200 x 1065. Sound insulation Rw – min. 36 dB. Nemef lock (1769) and Inox handle (TL07).
White doors will be fitted between the rooms.
Dimensions: 2100 mm high and 770 –870 mm wide.The door trim set consists of 2 long (70 x 2400 x 10 mm) and 1 short part. There is provided a total extension of the long part of the doorframe in the wall thickness of 150 mm. Wooden door comes with classic, hinged door hinges with support bearings that provide easy and quiet door opening and closing.
Indoor and outdoor handles Inox (TL07) are made of high-quality stainless steel. Handles are fastened with clamp screws through the lock. Such universal fastening type fits with the DIN (European) and Scandinavian standard case. Handle has an extra hex screw to fasten the axle between the handles. The handle axle has diameter of 8 mm.
Shower corner - ALPHA 2
Profile: matt chrome, glass – 4/5 mm one-piece glass (transparent).
Dimensions: 900 x 900 x H1900 mm.
ALPHA 2 sliding doors have high-quality double rollers that provide optimal sliding door segment performance and ensure smooth door opening and closing; Robust and enjoyable plastic handle (colour: chrome);
Shower tray ULTRA FLAT
Type: square tray 90 x 90 cm, height of the tray – 17 cm.
S-trap for the shower tray ULTRA FLAT.
Size: d 60 mm.
Shower set IDEALRAIN SOFT M1 (B9412AA), IDEAL STANDARD.
The set contains: shower head – d = 100 mm with 1 mode and water flow of 8 l/min; d = 21 mm sliding shower rod 600 mm; adjustable holder for the shower handset; flexible metal hose – 1750 mm; transparent plastic soap dish; Ideal Standard logo on the shower handset.
Mixer CERAFLEX for shower (B1720AA), IDEAL STANDARD.
40 mm HWTC cartridge, "Click" technology, temperature limiter, automatic switch, metal handle with red and blue colour indication, standard S-connection, check valve, 150 mm connection by centres.
Built-in bath-tub 1600 x 700 mm, white without mixer hole (K274501), IDEAL STANDARD.
Length: 1600 mm.
Material: 4 mm acrylic.
Colour: white, capacity: 210 l.
Bath-tub feet (B156467), bath-tub front panel 160 cm (K229901), IDEAL STANDARD.
Mixer CERAFLEX for bath-tub (B1721AA), IDEAL STANDARD, manufacturer: Ideal Standard (Germany), 40 mm HWTC cartridge, "Click" technology, temperature limiter, automatic switch, metal handle with red and blue colour indication, S-connections, cascade aerator, check valve, 150 mm connection by centres, G1/2 shower connection.
S-trap SIMPLEX (285357)
Type: bath-tub S-trap Ø52 mm.
Toilet bowl ESEDRA, suspended (T281401), IDEAL STANDARD.
Horizontal waste water outlet, made of sanitary ceramics, shiny smooth surface, deep rinse function, made according to modern technologies, in accordance with traditional technologies for the production of sanitary ceramics.
Lid for the ESEDRA toilet bowl with "Easy Take Off" hinges, IDEAL STANDARD.
Material: thermosetting plastics.
Built-in mechanism IDEAL STANDARD (W370567), insulation seal and button ROUNDED (W3709AA).
Quiet operation and high reliability. Frame width – 35 cm. Built-in 3/6 l flushing tank box with anti-condensate coating and water supply from above, with 1/2" connection. Mounting height from 1.10 m to 1.30 m, easy height adjustment. 2 screw fasteners for fixing the suspended toilet-bowl, screw spacing is 180/230 mm. The set also contains a PE water drain tube. Button ROUNDED, 2-mode chrome-plated push button.
Wash-basin CONNECT CUBE (E794501), 60 x 46 cm.
Depth: 460 mm.
Width: 600 mm.
CERAFLEX GRANDE, for washbasin, chrome (B1721AA). Strong rod with water flow of 5 l/min, metal drain, projection – 110 mm, output height 95 mm.
White universal panel radiators PURMO Ventil Compact with profiled heating panels and convection elements, equipped with covering plates on the sides and grid type top cover, are installed in the apartments. Radiators have a built-in thermostat insert with a mechanism for preliminary adjustment. Height of radiators is 300 and 600 mm, but length is from 500 up to 2300 mm. The following radiators will be used for finishing: CV11, CV21, CV22 and CV33. Height 200 mm: CV/FCV/FFCV11, CV/FCV/FFCV21, CV/FCV/FFCV22 and CV/FCV/FFCV33.
Floors in the sanitary facilities are heated; the heating system includes the installed thermostat and floor sensors and provides heating at any time, when apartment owners wish this. A heating mat 150 W/m², S = 2.0 m², S = 2.5 m², S = 3.0 m², S = 3.5 m², S = 4.0 m² and a heating cable L = 10 m, 230 V will be used.